 |
Full Auto EL Backlight |
|
Automatically deactivates the Auto EL Backlight function when
surrounding light is sufficient, and activates it under dim light
or dark conditions.
|
 |
EL Backlight (with Auto Light) |
|
An electro-luminescent panel causes the entire face to glow for easy
reading.Auto light automatically turns on the EL backlight when the watch
is tilted towards your face for reading.
|
 |
EL Backlight |
|
An electro-luminescent panel causes the entire face to glow for easy reading.
Includes an After-Glow function that keeps the EL backlight turned on for a
few seconds after the light button is released.
|
 |
LED Light (Double) |
Separate lighting for the digital and analog portions of the face for easy
reading.
|
 |
LED Light (Multi) |
An LED backlight that illuminates the display using various different colors.
|
 |
Solar Power |
A solar cell provides power for operation.
|
 |
Duplex LCD |
Two liquid crystal panels make it possible to select from among different display patterns.
|
|
|
e-DATA MEMORY |
Memory for storage of Internet access codes and other information.
|
|
|
Telememo |
Built-in memory provides storage for anames and phone numbers.
The value indicates the maximum number of entries that can be stored.
|
|
|
World Time |
Display the current time in major cities and specific areas around
the world.
R: Current time in major cities around the world
Values indicate number of cities/areas.
|
 |
Preset Sites |
Display the current time and other information for a preset site (point).
Values indicates the number of preset sites.
|
 |
Dual Time |
Simultaneous display of the current time in two different time zones.
|
 |
Moon Age Display |
The mooon age and phase are shown on the display based on your current latitude and longitude.
|
 |
Tide Graph Display |
|
Tidal movements are displayed graphically based on your current latitude and longitude,
and the lunitidal interval.
|
 |
Sunrise, Sunset Time Display |
Sunrise and sunset times are displayed based on your current latitude and longitude.
|
 |
City Temperature Data |
Display of average monthly high and low temperatures for each
of the built-in city codes.
|
 |
Day Counter |
Shows the number of days from the current date to another date.
|
|
|
Stopwatch |
Accurate measurement of elapsed time with the touch of a button. The
fraction indicates the unit of measurement, while the time figure
indicates the maximum time measurement.
|
|
|
Timer |
Counts down from a start time specified by you. The value indicates the number of timers available,
while the time figure indicates the maximum starting time. "REPEAT" indicates Auto Repeat, which
automatically restarts timing at the end of each countdown.
|
|
|
Multi Alarm, Hourly Time Signal |
|
Multi alarm lets you set a daily alarm (time setting only), or an alarm for a specific time on a
specific day (month, day, and time setting). The value indicates how many multi alarms are available.
The hourly time signal causes the watch to beep every hour on the hour.
|
|
|
Daily Alarm, Hourly Time Signal |
|
The daily alarm sounds each day at the time you set. The value indicates how many daily alarms are available.
The hourly time signal causes the watch to beep every hour on the hour.
|
 |
Beeper Alarm |
Beeper tone alarm sounds at the time you set.
|
 |
Snooze Feature |
Each time you stop the alarm, it sounds again after a few minutes.
|
|
|
Long Battery Life |
Battery lasts for at least three years. The value indicates actual battery life.
|
 |
Battery Level Indicator |
Indicator shows the current battery level.
|
 |
Full Auto Calendar |
Allowances are made automatically for months of different lengths, and even leap year.
|
 |
12/24-hour Timekeeping |
Times can be displayed in either a 12-hour or 24-hour format.
|
|
|
Low-Temperature Resistant |
The timekeeping module is designed for operation at very low temperatures.
The value indicates the lowest temperature at which the module will operate.
*–10°C resistance does not apply to the direction sensor.
|
.gif)
